Before Comparing Plush Quotes, Give Each Height Its Own Definition

Supplier perspective from XiPlush. A request for a finished plush height can describe different things: the top of the head, the tip of an ear, or the top of an attached loop. For an enquiry involving several suppliers, replace that single ambiguous label with a measurement record each supplier can answer. The useful addition is a shared definition, rather than an assumed industry convention.

Separate the dimensions you actually need

Create a body-height row and, if relevant, an overall-height row. These are buyer-defined labels, so explain both. Body height might end at the marked head point while overall height ends at an ear or horn tip. Decide whether a hanging loop belongs in either row or needs a separate attachment measurement. An excluded feature has not disappeared from the product; its size and position may still matter to the intended use.

Give every row identifiable endpoints

Use a row ID, dimension name, unit, starting point A and ending point B. Mark those same letters on the current reference. Write whether the requested distance is vertical, horizontal or follows another agreed path. A line along a curved surface should not silently become a straight vertical height. Ask the maker to acknowledge the proposed method or identify what needs changing before treating the comparison as complete.

Describe the measuring condition

Name the pose and support: seated on a surface, upright with specified support, or another project-defined position. Record what happens to the ears, horn and loop during measurement. For a flexible loop, a naturally resting position and a raised position answer different questions. Avoid wording such as ‘fully stretched’ unless the action and purpose have been discussed. Any handling or pressure used to take the measurement belongs in the record.

Add a response field to the enquiry

A copyable row is: [measurement ID] | [dimension name] | [target and unit, if decided] | [point A] | [point B] | [direction or path] | [pose and attachment state] | [reference version] | [supplier response] | [open decision]. Leave an undecided value marked ‘to confirm’. Ask each supplier to reference the row ID when proposing a different definition, rather than replacing your wording without identifying the change.

Keep requested and observed values separate

When a sample is available, add its identity, the observed reading and the measurement date beside the original requirement. A requested target, a supplier proposal and a sample reading are different entries. Agree any permitted variation and acceptance method for the actual design; a blank tolerance field means unresolved, rather than automatically acceptable. A photograph can document the setup, but its apparent scale does not establish a dimension.

Return the same record with the quotation

Ask which measurement definitions underpin the proposal and which remain open. Save that response with the artwork and quotation versions, so a later change to ear position or loop configuration can be assessed against the same record. This supplier-authored guide offers an enquiry format, not a measured product specification or a quotation promise. Bring your actual design, intended use and quantity to a XiPlush project discussion.

Discuss your custom plush requirements with XiPlush.

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top
0
Your cart is empty

Add products from listed suppliers to request quotes.

Browse products

Save selection list

Products and planned quantities are saved. Current inquiry items will stay in your list.